PEX Tubing & Fittings

Back

72 found, showing page 5 of 5
Featured Product
3/4x50 Pex Tube $36.99
3/4x50 Pex Tube 3/4" Rigid Copper Tube Size x 50', White, Pex Coil, For Hot/Cold Water, Use With 3/4" Quick Connect & Brass Pex Insert Fittings, W Type B Burst Pex Pipe Rated 1,100 PSI At 73 Degrees Fahrenheit, 375 PSI At 180 Degree sFahrenheit, Type B Silane Method Pex Has More Anti-Oxidants & Thermal Stabilizers Which Is Critical For Chlorine Ratings & Recirculation Systems, Type A,B,C Are European System Designations Not Rating/Grading System For Pex, Do Not Use Duct Tape, Pipe Dope, Threading Compound, Mineral/Linseed Oil, Support Pipe Every 30" Vertically & Horizontally, Protect Pipe When Entering/Exiting Slab Or Walls, Do Not Kink Or Expose To Sunlight, Minimum Clearance To Water Heaters, Boilers, Wood Burning Appliances 18", Recessed Lights 12", Gas Appliance Vents 6", NSF-61 FDA, CSA/ASTM, UPC Listed/Approved, 25 Year Warranty Even When Used With Other Manufacturers ASTM SDR-9 Certified Fittings, Covers Materials, Labor & Is Not Pro-Rated.
Featured Product
3/8 1/2Pex Bend Support $4.79
3/8 1/2Pex Bend Support 3/8" & 1/2", Pex Terminal Bend Support, Plastic Elbows That Attached To The Straight True Value #608-754 &/Or Angle True Value #608-762 Galvanized Pex Brackets To Make Smooth, Clean Transitions Up To & Out Of Walls Or Manifolds.
Featured Product
3/8CTSx50 WHT Pex Coil $17.99
3/8CTSx50 WHT Pex Coil 3/8" Rigid Copper Tube Size x 50', White, Pex Coil, For Hot/Cold Water, Use With 3/8" Quick Connect & Brass Pex Insert Fittings, W Type B Burst Pex Pipe Rated 1,100 PSI At 73 Degrees Fahrenheit, 375 PSI At 180 Degrees Fahrenheit, Type B Silane Method Pex Has More Anti-Oxidants & Thermal Stabilizers Which Is Critical For Chlorine Ratings & Recirculation Systems, Type A,B,C Are European System Designations Not Rating/Grading System For Pex, Do Not Use Duct Tape, Pipe Dope, Threading Compound, Mineral/Linseed Oil, Support Pipe Every 30" Vertically & Horizontally, Protect Pipe When Entering/Exiting Slab Or Walls, Do Not Kink Or Expose To Sunlight, Minimum Clearance To Water Heaters, Boilers, Wood Burning Appliances 18", Recessed Lights 12", Gas Appliance Vents 6", NSF-61 FDA, CSA/ASTM, UPC Listed/Approved, 25 Year Warranty Even When Used With Other Manufacturers ASTM SDR-9 Certified Fittings, Covers Materials, Labor & Is Not Pro-Rated.
Featured Product
Poly Pex Coupling, Alloy Barb, 1/2-In., 5-Pk. $4.99
Poly Pex Coupling, Alloy Barb, 1/2-In., 5-Pk. Sharkbite, 5 Pack, 1/2", Poly Pex Coupling, Alloy Barb, Easy To Install, Low Cost Solution To Connect To Pex Tubing, Suitable For Potable Water Distribution & Hydronic Heating Applications, For Use With Stainless Steel Clamp System Or A Copper Crimp Ring System, Not Included.
Featured Product
Poly Pex Elbow, Alloy Barb, 1/2-In., 5-Pk. $5.99
Poly Pex Elbow, Alloy Barb, 1/2-In., 5-Pk. Sharkbite, 5 Pack, 1/2", Poly Pex Elbow, Alloy Barb, Easy To Install, Low Cost Solution To Connect To Pex Tubing At A 90 Degree Angle, Suitable For Potable Water Distribution & Hydronic Heating Applications, For Use With A Stainless Steel Clamp System Or A Copper Crimp Ring System, Not Included.
Featured Product
Barb Coupling, 3/4" x 1" PEX $4.99
Barb Coupling, 3/4" x 1" PEX 3/4" x 1", Sharkbite RT Pex Barb Reducing Coupling, Made Of Lead Free DZR Brass, Easy To Install, Allows For You To Reduce Pipe Size With 1 Fitting, Compatible With Potable Water Distribution & Hydronic Heating Applications, Can Be Used InBoth Stainless Steel Clamp Systems Or A Copper Crimping System, ASTM F1807, SNF/ANSI 61, NSF 372 Approvals.
Featured Product
Barb Insert Elbow, 1", Brass PEX $7.29
Barb Insert Elbow, 1", Brass PEX 1", Lead Free Brass Barb Insert Elbow, For Connecting 2 Pieces Of 1" Cross Link Polyethylene Pex Tubing, Secure Barb Ends Of Fittings To Pex Pipe With TV #597-556 Cinch Clamps & TV #608-743 Cinch Tool, Or TV #597-325 Copper Crimp Rings & TV #597-693 Crimp Tool, Immediately Testable To Well Over 100 PSI, Meets The New NSF/ANSI Standard 14-2009 & ASTM F 1807-9SI Standard For Products Intended For The Transport Of Potable Water, ANSI/NSF Standard 61 Annex G For Lead Free Compliance & The Wetted Surface Of This Product Contacted By Consumable Water Contains Less Than 0.25% Of Lead By Weight To Meet AB1953 California & VT S152 Vermont Low Lead Restrictions.
Featured Product
Barb Insert Tee, 1", Brass, PEX $9.49
Barb Insert Tee, 1", Brass, PEX 1", Brass, Lead Free Barb Insert Tee, For Connecting 3 Pieces Of 1" Cross Link Polyethylene Pex Tubing, To Secure Barb Ends Of Fittings To Pex Pipe With TV #597-556 Cinch Clamps & TV #608-743 Cinch Tool, Or TV #597-325 Copper Crimp Rings &TV #597-693 Crimp Tool, Not Included, Immediately Testable To Well Over 100 PSI, Meets NSF/ANSI Standard 14-2009 & ASTMF 1807-9SI Standard For Products Intended For The Transport Of Potable Water, ANSI/NSF Standard 61 Annex G For Lead Free Compliance & The Wetted Surface Of This Product Contacted By Consumable Water Contains Less Than 0.25% Of Lead By Weight To Meet Ab1953 California & Vt S152 Vermont Low Lead Restrictions.
Featured Product
Brass Crimp Coupling, 1", PEX $4.49
Brass Crimp Coupling, 1", PEX 1", Brass, Lead Free, Brass Crimp Coupling, For Connecting 2 Pieces Of 1" Cross Link Polyethylene Pex Tubing, Immediately Testable To Well Over 100 PSI, To Secure Barb Ends Of Fittings To Pex Pipe May Use With TV #597-556 Cinch Clamps & TV#608-743 Cinch Tool, Or TV #597-325 Copper Crimp Rings & TV #597-693 Crimp Tool, Not Included, Meets NSF/ANSI Standard 14-2009 & ASTM F 1807-9SI Standard For Products Intended For The Transport Of Potable Water, ANSI/NSF Standard 61 Annex G For Lead Free Compliance & The Wetted Surface Of This Product Contacted By Consumable Water Contains Less Than 0.25% Of Lead By Weight To Meet Ab1953 California & Vt S152 Vermont Low Lead Restrictions.
Featured Product
Crimp Ring Removal Tool-PEX $29.99
Crimp Ring Removal Tool-PEX Crimp Ring Removal Tool, Use To Take Off Copper Crimp Rings In The Event Of A Mis-Installation, Cut The Pex Pipe As Near The End Of The Barbed Insert Fitting, Open The Tool To Its Fullest & Place The Stub End Of The Crimp Ring Removal Tool Into The Fitting, The Cutting Blade Should Be On The Outside Of The Fitting & Pex Pipe, Squeeze The Handles Together So The Cutting Blade Cuts Through The Pex Pipe, Remove Tool From Fitting & Peel Pex Pipe From Fitting, The Fitting Can Be Reused If Not Damaged.
Featured Product
1" Lead Free Brass Barb Insert x 1" Male Iron Pipe Thread Adapter $8.49
1" Lead Free Brass Barb Insert x 1" Male Iron Pipe Thread Adapter 1" Lead Free Brass Barb Insert x 1" Male Iron Pipe Thread Adapter, For Connecting 1" Cross Link Polyethylene Pex TubingTo 1" Female Iron Pipe Thread Pipe End Or Fitting, Secure Barb Ends Of Fittings To Pex Pipe With TV #597-556 Cinch Clamps & TV #608-743 Cinch Tool, Or TV #597-325 Copper Crimp Rings & TV #597-693 Crimp Tool, Immediately Testable To Well Over 100 PSI, Meets The New NSF/ANSI Standard 14-2009 & ASTM F 1807-9SI Standard For Products Intended For The Transport Of Potable Water, ANSI/NSF Standard 61 Annex G For Lead Free Compliance & The Wetted Surface Of This Product Contacted ByConsumable Water Contains Less Than 0.25% Of Lead By Weight To Meet AB1953 California & VT S152 Vermont Low Lead Restrictions.
Featured Product
Pex Cinch Clamp Tool $74.99
Pex Cinch Clamp Tool Pex Cinch Clamp Tool, Quick & Reliable Connections, Immediate Pressure Testing To Well Over 100 PSI, First Time Every Time Connections As Tool Design Eliminates Worries Of Old Style Jaws & Calibration Issues, Less Expensive Than Buying 4 Separate Tools, 1 Tool Does 3/8" TV #608-685, 1/2" TV #608-933 & 3/4" TV #608-826 & 1" TV #597-556 Cinch Clamp Pex Connections.
72 found, showing page 5 of 5